{"title":"All Products","description":"\u003cp\u003eEvery product we sell, A to Z. To shop by type, start with \u003ca href=\"\/collections\/rack-mount-kits\"\u003erack mount kits\u003c\/a\u003e, \u003ca href=\"\/collections\/wall-mounts\"\u003eHangLab wall mounts for UniFi gateways\u003c\/a\u003e, \u003ca href=\"\/collections\/rack-pdus\"\u003erack PDUs\u003c\/a\u003e, \u003ca href=\"\/collections\/rackmount-ups\"\u003erackmount UPS\u003c\/a\u003e or \u003ca href=\"\/collections\/racks-enclosures\"\u003eracks\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"alm-m82-anti-ligature-maglock-mount-securitron-m82","title":"ALM-M82 Anti-Ligature Maglock Mount for Securitron M82","description":"\u003cp\u003e\u003cstrong\u003eA maglock bracket with nowhere to tie off.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA standard M82 header bracket leaves a flat ledge above the lock. In a behavioral health unit, a patient room, or a group home, that ledge is the problem. The ALM-M82 replaces it with a 34.8° sloped face — machined from solid aluminum, not folded sheet — so there is no horizontal surface to loop a cord over and nothing that will hold a load.\u003c\/p\u003e\n\u003cp\u003eEvery fastener that shows sits in an 82° countersink and finishes flush with or below the surface. No screw heads standing proud. No exposed hardware to grab.\u003c\/p\u003e\n\u003cp\u003eThe low profile also solves a second problem: shallow and obstructed headers where a conventional M82 bracket simply will not fit.\u003c\/p\u003e\n\u003ch3\u003eHow it goes in\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eThe bracket mounts to the header or frame first, through three countersunk holes.\u003c\/li\u003e\n\u003cli\u003eThe maglock comes up underneath and lands on the two tapped holes in the bracket.\u003c\/li\u003e\n\u003cli\u003eTwo supplied 1\/4-20 x 2-1\/2 in socket head cap screws run from the bottom face of the lock, up through the housing, and thread into the bracket. 3\/16 in hex drive.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFull installation sheet with the hole pattern ships in the box.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e ALM-M82\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Securitron M82, M82BD magnetic locks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall size:\u003c\/strong\u003e 12.000 x 1.837 x 0.650 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Sloped 34.8°, low profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Machined aluminum, polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 lb 0.6 oz (0.47 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall \/ frame attachment:\u003c\/strong\u003e Three countersunk holes, 82°, flat-head fasteners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax fastener head diameter:\u003c\/strong\u003e 0.52 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock attachment:\u003c\/strong\u003e Two 1\/4-20 x 2-1\/2 in socket head cap screws, 18-8 stainless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e 3\/16 in hex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Made in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat ships in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eALM-M82 bracket\u003c\/li\u003e\n\u003cli\u003eTwo 1\/4-20 x 2-1\/2 in socket head cap screws, 18-8 stainless\u003c\/li\u003e\n\u003cli\u003eInstallation sheet with the mounting hole pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot included — please read\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFasteners for the three countersunk wall and frame holes are not supplied.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMounting surfaces vary too much for us to pick for you — hollow metal frame, wood blocking, concrete, and stud wall all want a different anchor. Select flat-head fasteners to suit your substrate. The countersinks are 82° and accept a head up to 0.52 in diameter.\u003c\/p\u003e\n\u003ch3\u003eBefore you specify\u003c\/h3\u003e\n\u003cp\u003eEgress requirements for magnetic locks are not changed by this mount. Confirm free egress on fire alarm, sprinkler activation and loss of power, and confirm any delayed or controlled egress requirements with your authority having jurisdiction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSubmittal drawing available on request.\u003c\/strong\u003e A dimensioned drawing with the mounting hole pattern is supplied to specifiers and integrators — email \u003ca href=\"mailto:sales@rackit.com\"\u003esales@rackit.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"Rack IT","offers":[{"title":"Default Title","offer_id":56326296338572,"sku":"ALM-M82","price":215.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/ALM-M82-render-front.png?v=1788561956"},{"product_id":"apc-ap9562-rack-pdu","title":"APC AP9562 Basic Rack PDU, 1U 120V 15A, (10) 5-15R","description":"\u003cp\u003eThe workhorse of the network closet: ten 5-15R outlets across a single rack space, fed by a standard 15A wall circuit. Nothing to configure, nothing to fail.\u003c\/p\u003e\n\u003cp\u003eUse it where you need clean power distribution behind a switch and patch panel rather than metering or remote control. Mounting hardware is included, and the 12 ft cord reaches most wall receptacles without an extension.\u003c\/p\u003e","brand":"APC by Schneider Electric","offers":[{"title":"Default Title","offer_id":59154663932044,"sku":"AP9562","price":156.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/apc-ap9562-rack-pdu-front.jpg?v=1792678684"},{"product_id":"apc-ap9567-rack-pdu","title":"APC AP9567 Basic Rack PDU, 0U Vertical 120V 15A, (14) 5-15R","description":"\u003cp\u003eFourteen outlets mounted down the side of the rack, using no rack spaces at all. The right choice when every U is spoken for and you still need somewhere to plug in.\u003c\/p\u003e\n\u003cp\u003eRuns from a standard 15A circuit and takes ordinary 5-15P cords, so it suits switches, access point injectors, recorders and the mix of small gear that fills a closet.\u003c\/p\u003e","brand":"APC by Schneider Electric","offers":[{"title":"Default Title","offer_id":59154663964812,"sku":"AP9567","price":281.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/apc-ap9567-rack-pdu-front.jpg?v=1792678700"},{"product_id":"apc-ap9564-rack-pdu","title":"APC AP9564 Basic Rack PDU, 1U 120V 20A L5-20P, (10) 5-20R","description":"\u003cp\u003eA 20A strip for racks fed by a twist-lock L5-20 circuit, with ten 5-20R outlets that also take ordinary 5-15P plugs.\u003c\/p\u003e\n\u003cp\u003eChoose this one when the electrician ran a dedicated 20A twist-lock receptacle to the rack, which is common in newer closets and small server rooms.\u003c\/p\u003e","brand":"APC by Schneider Electric","offers":[{"title":"Default Title","offer_id":59154663997580,"sku":"AP9564","price":231.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/apc-ap9564-rack-pdu-front.jpg?v=1792678689"},{"product_id":"apc-ap9563-rack-pdu","title":"APC AP9563 Basic Rack PDU, 1U 120V 20A 5-20P, (10) 5-20R","description":"\u003cp\u003eThe straight-blade version of APC's 20A strip: a standard 5-20P plug instead of a twist-lock, with ten 5-20R outlets in one rack space.\u003c\/p\u003e\n\u003cp\u003ePick it when the rack is fed by a regular 20A receptacle. If the outlet on the wall has a sideways slot, this is the one that fits.\u003c\/p\u003e","brand":"APC by Schneider Electric","offers":[{"title":"Default Title","offer_id":59154664030348,"sku":"AP9563","price":261.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/apc-ap9563-rack-pdu-front.jpg?v=1792678695"},{"product_id":"apc-ap9566-rack-pdu","title":"APC AP9566 Basic Rack PDU, 1U 208V 16A, (12) C13","description":"\u003cp\u003eA 208V strip with twelve C13 outlets for servers, blades and switches that ship with IEC cords rather than wall plugs.\u003c\/p\u003e\n\u003cp\u003eRunning gear at 208V instead of 120V draws less current for the same load, which is why data center racks are wired this way.\u003c\/p\u003e","brand":"APC by Schneider Electric","offers":[{"title":"Default Title","offer_id":59154664620172,"sku":"AP9566","price":251.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/apc-ap9566-rack-pdu-outlets.jpg?v=1792678706"},{"product_id":"apc-ap7541-rack-pdu","title":"APC AP7541 Basic Rack PDU, 0U Vertical 208V 30A L6-30P, (20) C13 + (4) C19","description":"\u003cp\u003eTwenty-four IEC outlets down the side of the rack, including four C19s for the heavier draw of blade chassis, large UPS units and high-density switches.\u003c\/p\u003e\n\u003cp\u003eRuns from a 208V 30A twist-lock circuit and takes no rack spaces, leaving the full height for equipment.\u003c\/p\u003e","brand":"APC by Schneider Electric","offers":[{"title":"Default Title","offer_id":59154664652940,"sku":"AP7541","price":536.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/3258cd9ff640d6b5fefe9dd3f724deaafc1e07cf.jpg?v=1789569382"},{"product_id":"apc-ap8830-rack-pdu","title":"APC AP8830 NetShelter Metered Rack PDU, 0U 120V 20A, (24) 5-20R","description":"\u003cp\u003eA vertical 20A strip with a display that shows exactly how much of the circuit is in use, so you can add equipment without guessing.\u003c\/p\u003e\n\u003cp\u003eTwenty-four 5-20R outlets cover a full rack, and the readout saves a clamp meter trip every time someone asks whether there's room for one more server.\u003c\/p\u003e","brand":"APC by Schneider Electric","offers":[{"title":"Default Title","offer_id":59154664751244,"sku":"AP8830","price":874.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/apc-ap8830-rack-pdu-front.jpg?v=1792678718"},{"product_id":"apc-ap7802b-rack-pdu","title":"APC AP7802B Metered Rack PDU, 2U 120V 30A, (16) 5-20R","description":"\u003cp\u003eSixteen 5-20R outlets on a 30A circuit with a front-panel load meter, laid out across two rack spaces so cords have room to sit.\u003c\/p\u003e\n\u003cp\u003eSuits racks where the load changes often and tripping the breaker would take down more than one customer's gear.\u003c\/p\u003e","brand":"APC by Schneider Electric","offers":[{"title":"Default Title","offer_id":59154665078924,"sku":"AP7802B","price":1172.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/apc-ap7802b-rack-pdu-front.jpg?v=1792678725"},{"product_id":"apc-ap7900b-rack-pdu","title":"APC AP7900B Switched Rack PDU, 1U 120V 15A, (8) 5-15R","description":"\u003cp\u003eEight outlets you can switch on, off or reboot one at a time from a browser, plus metering for the whole strip. The fix for a hung access point or camera at a site an hour away.\u003c\/p\u003e\n\u003cp\u003eNetwork managed over Ethernet, with outlet naming and power-on delays so a rack comes back up in the right order after an outage.\u003c\/p\u003e","brand":"APC by Schneider Electric","offers":[{"title":"Default Title","offer_id":59154665111692,"sku":"AP7900B","price":925.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/993d5d5d26dfc4fec8a2134e60e372d6d1fbfe88.jpg?v=1789569386"},{"product_id":"apc-ap7901b-rack-pdu","title":"APC AP7901B Switched Rack PDU, 1U 120V 20A L5-20P, (8) 5-20R","description":"\u003cp\u003eThe 20A twist-lock version of APC's switched strip: eight 5-20R outlets, each one controllable from a browser, with load metering for the whole unit.\u003c\/p\u003e\n\u003cp\u003eWorth it the first time a remote reboot saves a site visit, and it keeps a record of what was switched and when.\u003c\/p\u003e","brand":"APC by Schneider Electric","offers":[{"title":"Default Title","offer_id":59154665144460,"sku":"AP7901B","price":1063.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/apc-ap7901b-rack-pdu-front.jpg?v=1792678712"},{"product_id":"cyberpower-pdu41001-rack-pdu","title":"CyberPower PDU41001 Switched Rack PDU, 1U 120V 15A, (8) 5-15R","description":"\u003cp\u003eRemote outlet control at a lower price than the usual names: eight individually switched 5-15R outlets, managed over the network, in one rack space.\u003c\/p\u003e\n\u003cp\u003eA sensible pick for closets where remote reboot matters but the budget doesn't stretch to a premium brand, backed by CyberPower's three-year warranty.\u003c\/p\u003e","brand":"CyberPower","offers":[{"title":"Default Title","offer_id":59154665177228,"sku":"PDU41001","price":605.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/b18301f20b6a36f1116880c720f06b2e34b5cc81.jpg?v=1789569388"},{"product_id":"apc-ap8641-rack-pdu","title":"APC AP8641 NetShelter Switched Rack PDU, 0U 208V 30A L6-30P, (21) C13 + (3) C19","description":"\u003cp\u003ePer-outlet switching and per-outlet metering for a full 208V rack: twenty-one C13 outlets and three C19s, all controllable and measurable from the network.\u003c\/p\u003e\n\u003cp\u003eThis is the unit for colocation and dense server racks, where you bill or budget power by the device and need to reboot one machine without touching the rest.\u003c\/p\u003e","brand":"APC by Schneider Electric","offers":[{"title":"Default Title","offer_id":59154665209996,"sku":"AP8641","price":2384.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/f91953e4dab5ae90a762a6524c31b0dc532e0638.jpg?v=1789569389"},{"product_id":"apc-smt1500rm2uc-rackmount-ups","title":"APC Smart-UPS SMT1500RM2UC, 2U Rackmount 1500VA\/1000W 120V with SmartConnect","description":"\u003cp\u003eThe rackmount UPS most closets end up with: 1500VA \/ 1000W of line-interactive backup with automatic voltage regulation, an LCD on the front and SmartConnect cloud monitoring built in.\u003c\/p\u003e\n\u003cp\u003eEnough runtime to ride out brief outages and shut equipment down cleanly on longer ones, and it emails you when a battery needs replacing.\u003c\/p\u003e","brand":"APC by Schneider Electric","offers":[{"title":"Default Title","offer_id":59154665275532,"sku":"SMT1500RM2UC","price":963.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/6f58dc5a5a05a0a850661dbea52dd6f57fb91e13.jpg?v=1789569391"},{"product_id":"cyberpower-cp1500pfcrm2u-rackmount-ups","title":"CyberPower CP1500PFCRM2U PFC Sinewave UPS, 2U Rackmount 1500VA\/1000W","description":"\u003cp\u003ePure sine wave output at a price closer to a stepped-wave unit, which matters because active PFC power supplies in newer servers and NAS boxes can refuse to run on simulated sine wave.\u003c\/p\u003e\n\u003cp\u003e1500VA \/ 1000W in two rack spaces, with an LCD, automatic voltage regulation and a three-year warranty.\u003c\/p\u003e","brand":"CyberPower","offers":[{"title":"Default Title","offer_id":59154665439372,"sku":"CP1500PFCRM2U","price":359.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/8e0e614dfe33961af04324b573d17aa14d9ed4ef.jpg?v=1789569393"},{"product_id":"cyberpower-or1500lcdrm1u-rackmount-ups","title":"CyberPower OR1500LCDRM1U Smart App UPS, 1U Rackmount 1500VA\/900W","description":"\u003cp\u003eBattery backup in a single rack space, which is the whole point when a wall-mount cabinet has four spaces and three are already full.\u003c\/p\u003e\n\u003cp\u003e1500VA \/ 900W with an LCD, automatic voltage regulation and six 5-15R outlets: enough for a switch, firewall, recorder and modem.\u003c\/p\u003e","brand":"CyberPower","offers":[{"title":"Default Title","offer_id":59154665472140,"sku":"OR1500LCDRM1U","price":614.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/cyberpower-or1500lcdrm1u-rackmount-ups-front.jpg?v=1792678731"},{"product_id":"cyberpower-or1000lcdrm1u-rackmount-ups","title":"CyberPower OR1000LCDRM1U Smart App UPS, 1U Rackmount 1000VA\/600W","description":"\u003cp\u003eThe smaller 1U backup for closets that hold a switch, a firewall and not much else. 1000VA \/ 600W, six 5-15R outlets, LCD and automatic voltage regulation.\u003c\/p\u003e\n\u003cp\u003eSized right for a single PoE switch and a couple of small devices, without paying for capacity the rack will never use.\u003c\/p\u003e","brand":"CyberPower","offers":[{"title":"Default Title","offer_id":59154665504908,"sku":"OR1000LCDRM1U","price":505.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/cyberpower-or1000lcdrm1u-rackmount-ups-front.jpg?v=1792678738"},{"product_id":"rackmount-it-rm-ci-t18","title":"Rackmount.IT RM-CI-T18 Rack Mount Kit for Meraki MS130-8X\/12X, MS130-8P-I, MS120","description":"\u003cp\u003eMeraki's compact switches ship with rubber feet and no rack ears. This kit gives them a 1U mount with the ports facing the front of the rack.\u003c\/p\u003e\n\u003cp\u003eCovers the MS130 8X, 12X and 8P-I along with the MS120, so one part number handles most small Meraki deployments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Cisco Meraki MS130-8X, MS130-12X, MS130-8P-I, MS120\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163138326668,"sku":"RM-CI-T18","price":146.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/f14fe84297745c7b9368b3975677496965eaf956.jpg?v=1789569414"},{"product_id":"rackmount-it-rm-sw-t12","title":"Rackmount.IT RM-SW-T12 Rack Mount Kit for SonicWall TZ280, TZ380, TZ480, TZ570, TZ580, TZ670, TZ680","description":"\u003cp\u003eRacks a SonicWall TZ280, TZ380, TZ480, TZ570, TZ580, TZ670 or TZ680 in one rack space with the ports facing forward and the power supply held inside the enclosure. It fits the TZ500 and the TZ570P as well.\u003c\/p\u003e\n\u003cp\u003eFor the W wireless models, the TZ380W and TZ570W, the front panel has punch-out holes for the antennas; SMA extension cables aren't included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e SonicWall TZ280, TZ380, TZ380W, TZ480, TZ500, TZ570, TZ570P, TZ570W, TZ580, TZ670, TZ680\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163138359436,"sku":"RM-SW-T12","price":146.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/222d120003f1862b449483ad0835bcb28336d425.jpg?v=1789569435"},{"product_id":"rackmount-it-rm-pa-t12","title":"Rackmount.IT RM-PA-T12 Rack Mount Kit for Palo Alto ION 1200-S, PA-415","description":"\u003cp\u003eCovers the ION 1200-S and the PA-415, including the 5G variant, in a single 1U enclosure with the ports facing forward.\u003c\/p\u003e\n\u003cp\u003eThe antenna connections on the 5G model stay accessible, so the unit can be racked without giving up signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Palo Alto ION 1200-S, PA-415, PA-415-5G\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163138392204,"sku":"RM-PA-T12","price":146.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/968a995c1ed17c5a4ba1f0fe2a185d5ca02a7ef2.jpg?v=1789569426"},{"product_id":"rackmount-it-rm-pa-t10","title":"Rackmount.IT RM-PA-T10 Rack Mount Kit for Two Palo Alto PA-440, PA-450, PA-460","description":"\u003cp\u003eHolds two PA-440, PA-450 or PA-460 firewalls side by side in one rack space, which is how most HA pairs should be racked.\u003c\/p\u003e\n\u003cp\u003eBoth appliances face forward with their ports reachable, and both power supplies mount inside the enclosure rather than hanging behind the rack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Palo Alto PA-440, PA-450, PA-460 (holds two appliances)\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163138523276,"sku":"RM-PA-T10","price":163.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/5464136ac354f7ce83be2c8e6635fb17e9cabe3b.jpg?v=1789569422"},{"product_id":"rackmount-it-rm-ci-t16","title":"Rackmount.IT RM-CI-T16 Rack Mount Kit for Cisco Catalyst 9800-L Wireless Controller","description":"\u003cp\u003eRacks the Catalyst 9800-L wireless controller in a single rack space, ports forward, with the power supply secured inside the enclosure.\u003c\/p\u003e\n\u003cp\u003eWireless controllers tend to live in closets that everyone touches. Racking one properly keeps it from being the device that gets bumped.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Cisco Catalyst 9800-L wireless controller\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163138588812,"sku":"RM-CI-T16","price":137.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/993d7a7f06b4d2b15e4b417d01da464f729ae7c9.jpg?v=1789569413"},{"product_id":"rackmount-it-rm-ci-t8","title":"Rackmount.IT RM-CI-T8 Rack Mount Kit for Cisco Firepower 1010, ASA 5506-X","description":"\u003cp\u003eRacks a Firepower 1010 or ASA 5506-X in a single rack space with its ports brought to the front, instead of leaving the appliance on a shelf with cables looping around it.\u003c\/p\u003e\n\u003cp\u003eThe power supply mounts inside the enclosure, so the firewall can't be unplugged by accident during work in the rack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Cisco Firepower 1010, Cisco ASA 5506-X\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163138621580,"sku":"RM-CI-T8","price":146.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/209da97f2b8e823cebdd4d359b4a14a2041d1e54.jpg?v=1789569409"},{"product_id":"rackmount-it-rm-ci-t23","title":"Rackmount.IT RM-CI-T23 Rack Mount Kit for Cisco Meraki MX67, GX50","description":"\u003cp\u003eMounts a Meraki MX67 or GX50 in one rack space with its ports at the front. An optical fiber lens brings the status light to the front panel, so you can check the appliance at a glance without reaching behind the rack.\u003c\/p\u003e\n\u003cp\u003eThe power supply is fixed inside the kit, where it can't be pulled loose, and the MX67W and MX67C fit too. Finished in Cisco metallic blue.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Cisco Meraki MX67, MX67W, MX67C, GX50\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163138654348,"sku":"RM-CI-T23","price":128.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/rackmount-it-rm-ci-t23-rear-angle.jpg?v=1792678744"},{"product_id":"rackmount-it-rm-ci-t24mc","title":"Rackmount.IT RM-CI-T24MC Rack Mount Kit for Cisco Meraki MX68 with Media Converter","description":"\u003cp\u003eRacks a Meraki MX68, MX68W or MX68CW and leaves room for the media converter that fiber circuits arrive on, both in one rack space with ports forward.\u003c\/p\u003e\n\u003cp\u003eThat converter usually ends up velcroed to the side of the rack. This puts it where it can be seen and its lights read. For an MX75, choose the RM-CI-T24, which holds the appliance only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Cisco Meraki MX68, MX68W, MX68CW, plus a media converter\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163138719884,"sku":"RM-CI-T24MC","price":211.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/e247a1366cb7ff8ea597465da5f6c11f231bc4da.jpg?v=1789569420"},{"product_id":"rackmount-it-rm-ci-t15","title":"Rackmount.IT RM-CI-T15 Rack Mount Kit for Cisco Meraki Z4","description":"\u003cp\u003eThe Meraki Z4 is a teleworker gateway built to sit on a desk, which makes it awkward the moment it belongs in a rack. This kit gives it a 1U home with its ports facing forward.\u003c\/p\u003e\n\u003cp\u003eUseful in small offices and shared suites where a Z4 is doing real work and shouldn't be loose on a shelf.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Cisco Meraki Z4\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163138752652,"sku":"RM-CI-T15","price":137.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/3b484b38130aea775ae4e01284ced7a4a4f3d2ea.jpg?v=1789569412"},{"product_id":"rackmount-it-rm-ci-t24","title":"Rackmount.IT RM-CI-T24 Rack Mount Kit for Cisco Meraki MX68, MX75","description":"\u003cp\u003eMounts a Meraki MX68 or MX75 security appliance in one rack space with its ports at the front. An optical fiber lens brings the status light to the front panel, so you can check the appliance at a glance without reaching behind the rack.\u003c\/p\u003e\n\u003cp\u003eThe power supply is fixed inside the kit, where it can't be pulled loose, and the MX68W and MX68CW fit too. Finished in Cisco metallic blue. For an MX68 with a fiber media converter, the RM-CI-T24MC holds both.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Cisco Meraki MX68, MX68W, MX68CW, MX75\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163138785420,"sku":"RM-CI-T24","price":130.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/3755fb735ff4c47df358c77c9919ddf074bd8ebd.jpg?v=1789569419"},{"product_id":"rackmount-it-rm-fr-t29","title":"Rackmount.IT RM-FR-T29 Rack Mount Kit for FortiGate 90G and FortiSwitch 108F","description":"\u003cp\u003eMounts a FortiGate 90G and a FortiSwitch 108F together in one rack space, which covers a whole small-site stack in a single U.\u003c\/p\u003e\n\u003cp\u003eExactly what a branch or retail closet needs: firewall and switch racked, ports forward, power supplies secured, nothing loose on a shelf.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e FortiGate 90G with FortiSwitch 108F\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163138818188,"sku":"RM-FR-T29","price":146.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/2129ec9b33c5fc2afb240a12bf2433a7917f0cac.jpg?v=1789569408"},{"product_id":"rackmount-it-rm-pa-t14","title":"Rackmount.IT RM-PA-T14 Rack Mount Kit for Palo Alto PA-450R, PA-455","description":"\u003cp\u003eMounts the ruggedized PA-450R or the PA-455 in one rack space, ports forward, power supply secured inside.\u003c\/p\u003e\n\u003cp\u003eThe R models often land in industrial and outdoor-adjacent sites where a firewall on a shelf collects dust and knocks. Racking it is the cheapest protection available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Palo Alto PA-450R, PA-450R-5G, PA-455\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163138850956,"sku":"RM-PA-T14","price":156.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/3c6b12ff0594cb61559aebf20ae1641eed9587c6.jpg?v=1789569426"},{"product_id":"rackmount-it-rm-ap-t3","title":"Rackmount.IT RM-AP-T3 Rack Mount Kit for Three Apple Mac mini M4","description":"\u003cp\u003eHolds three Mac mini M4 units in a single rack space, which is how Mac minis end up deployed: build machines, media servers, a small render farm.\u003c\/p\u003e\n\u003cp\u003ePorts face the front, the units stay ventilated, and nothing sits stacked on a shelf with cables looped between them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Apple Mac mini M4 (holds three)\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163138883724,"sku":"RM-AP-T3","price":118.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/6dbe0bcfd1200423ad8f0924f249155ff155f255.jpg?v=1789569447"},{"product_id":"rackmount-it-rm-pa-t11","title":"Rackmount.IT RM-PA-T11 Rack Mount Kit for Palo Alto ION 1200","description":"\u003cp\u003eThe 1U mount for the Prisma SD-WAN ION 1200, bringing its ports to the front of the rack and holding the power supply inside the tray.\u003c\/p\u003e\n\u003cp\u003eBranch SD-WAN boxes get moved and re-cabled more than most gear, which is exactly why they belong in a rack rather than on top of one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Palo Alto ION 1200\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163139047564,"sku":"RM-PA-T11","price":128.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/3e5fb315e88d7400458b4ee1966f7694b6ea834f.jpg?v=1789569423"},{"product_id":"rackmount-it-rm-hp-t1","title":"Rackmount.IT RM-HP-T1 Rack Mount Kit for HPE 1820-8G, 1920S-8G, Aruba 1930-8G, 2530-8G","description":"\u003cp\u003eOne kit covering four of the most common 8-port HPE and Aruba switches, each of which ships as a desktop unit with no rack ears.\u003c\/p\u003e\n\u003cp\u003eRacked, the ports face forward and the power supply sits inside the tray, which is the difference between a tidy closet and a shelf full of loose switches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e HPE 1820-8G, HPE 1920S-8G, Aruba 1930-8G, Aruba 2530-8G\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163139113100,"sku":"RM-HP-T1","price":128.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/058cfaea652bd20fd7f19589cdaf4df5f3d293e5.jpg?v=1789569444"},{"product_id":"rackmount-it-rm-fr-t18","title":"Rackmount.IT RM-FR-T18 Rack Mount Kit for FortiGate 80F-POE, 81F-POE","description":"\u003cp\u003eBuilt for the PoE versions of the 80F and 81F, which run warmer and draw more power than the standard models, so the cutouts and the power supply mount are sized for them.\u003c\/p\u003e\n\u003cp\u003ePorts face the front, and the larger PoE power supply sits inside the enclosure instead of hanging off the back of the rack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e FortiGate 80F-POE, 81F-POE, FortiWiFi 80F-POE, 81F-POE\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163139145868,"sku":"RM-FR-T18","price":165.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/73c1dfd6060616966c1b8cc7938cf16ddd644693.jpg?v=1789569406"},{"product_id":"rackmount-it-rm-fr-t11","title":"Rackmount.IT RM-FR-T11 Rack Mount Kit for FortiGate 80E, 81E","description":"\u003cp\u003eThe 1U kit for the 80E and 81E, PoE versions included, built so the firewall's ports face the front of the rack and the power supply is held inside the enclosure rather than dangling behind it.\u003c\/p\u003e\n\u003cp\u003eSame footprint as the rest of the FortiRack line, so a rack full of mixed FortiGate models still looks like it was installed on purpose.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e FortiGate 80E, 80E-POE, 81E, 81E-POE\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163139276940,"sku":"RM-FR-T11","price":156.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/b8c18a22db0bcd37ef3c0178c0a001da9908e481.jpg?v=1789569399"},{"product_id":"rackmount-it-rm-fr-t20","title":"Rackmount.IT RM-FR-T20 Rack Mount Kit for Two FortiGate 90G, 91G Firewalls","description":"\u003cp\u003eHolds two FortiGate 90G or 91G units side by side in a single rack space, which is the answer for an HA pair that would otherwise take two.\u003c\/p\u003e\n\u003cp\u003eBoth firewalls face forward with their ports accessible, and both power supplies mount inside. In a small closet, one rack space saved is worth having.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e FortiGate 90G, 91G (holds two appliances)\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163139375244,"sku":"RM-FR-T20","price":156.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/c19cf4a9f9fab6abdead0a9bd4cc9e9dc0dd7324.jpg?v=1789569407"},{"product_id":"rackmount-it-rm-sr-t14","title":"Rackmount.IT RM-SR-T14 Rack Mount Kit for Sophos XGS 88","description":"\u003cp\u003eThe 1U mount for the XGS 88, bringing its ports to the front and holding the power supply inside the enclosure.\u003c\/p\u003e\n\u003cp\u003eVented cutouts preserve the airflow path, which matters in a closet where the firewall shares a rack with a PoE switch running warm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Sophos XGS 88\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163140063372,"sku":"RM-SR-T14","price":156.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/rackmount-it-rm-sr-t14-front-angle.jpg?v=1792678750"},{"product_id":"rackmount-it-rm-sr-t16","title":"Rackmount.IT RM-SR-T16 2U Rack Mount Kit for Sophos XGS 116 to 138","description":"\u003cp\u003eMounts a Sophos XGS 116, 118, 126, 128, 136 or 138 firewall in the rack with its ports brought to the front. The kit takes two rack spaces, and Rackmount.IT builds it for dual power supply setups, with the power supply fixed inside so it can't be pulled loose.\u003c\/p\u003e\n\u003cp\u003eThe 116W to 136W wireless models fit too, though the kit isn't shaped around their antennas. Finished in signal white.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Sophos XGS 116, XGS 116W, XGS 118, XGS 118W, XGS 126, XGS 126W, XGS 128, XGS 128W, XGS 136, XGS 136W, XGS 138\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163140194444,"sku":"RM-SR-T16","price":174.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/c087a66d139822c2eb72e24dd448e19a5d45d4bb.jpg?v=1789569430"},{"product_id":"rackmount-it-rm-fr-t10","title":"Rackmount.IT RM-FR-T10 Rack Mount Kit for FortiGate 60E, 61E, 60F, 61F, 70F, 71F, 70G, 71G","description":"\u003cp\u003eTurns a desktop FortiGate into a proper 1U rack citizen. The firewall sits in a steel tray that brings every port to the front of the rack, so patching happens at the front instead of behind the gear.\u003c\/p\u003e\n\u003cp\u003eThe power supply clips inside the enclosure, which ends the most common cause of accidental outages: someone brushing the brick and pulling the barrel connector. Cutouts keep airflow across the unit intact.\u003c\/p\u003e\n\u003cp\u003eThe FortiDeceptor 100G and the FortiWiFi 60E, 60E-DSL, 60F, 61F, 70G, 70G-POE and 71G fit too, though the kit isn't shaped around the FortiWiFi antennas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e FortiGate 60E, 60E-POE, 60E-DSL, 61E, 60F, 61F, 70F, 71F, 70G, 70G-POE, 71G, 71G-POE, FortiWiFi 60E, 60E-DSL, 60F, 61F, 70G, 70G-POE, 71G, FortiDeceptor 100G\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163140325516,"sku":"RM-FR-T10","price":136.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/743d8a94aef1a9e8791058143efa074ca830cb02.jpg?v=1789569399"},{"product_id":"rackmount-it-rm-sr-t10","title":"Rackmount.IT RM-SR-T10 Rack Mount Kit for Sophos RED 20, RED 60","description":"\u003cp\u003eRacks a Sophos RED 20 or RED 60 remote ethernet device with its ports facing the front, rather than leaving it loose at a branch site.\u003c\/p\u003e\n\u003cp\u003eRED appliances are installed by whoever is on site, often not a network person. Racked and cabled from the front, there's less to get wrong later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Sophos RED 20, Sophos RED 60\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163140456588,"sku":"RM-SR-T10","price":156.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/f6abc25ee97fe402f7bde50e328efbb206516eef.jpg?v=1789569428"},{"product_id":"rackmount-it-rm-ub-t4","title":"Rackmount.IT RM-UB-T4 Rack Mount Kit for Ubiquiti UniFi Switch Lite 8 PoE","description":"\u003cp\u003eThe UniFi Switch Lite 8 PoE is a desktop switch doing rack work in hundreds of small installs. This kit gives it a proper 1U mount with the ports facing forward.\u003c\/p\u003e\n\u003cp\u003eThe power supply mounts inside the tray, which removes the loose brick that usually ends up cable-tied to a rack rail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Ubiquiti UniFi Switch Lite 8 PoE (USW-Lite-8-PoE)\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163142979724,"sku":"RM-UB-T4","price":128.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/dba71e69970de8e2b37fa15b8cbc8435d5033467.jpg?v=1789569437"},{"product_id":"rackmount-it-rm-sr-t16i","title":"Rackmount.IT RM-SR-T16I Shielded 2U Rack Mount Kit for Sophos XGS 116 to 138","description":"\u003cp\u003eThe shielded version of the RM-SR-T16. It mounts a Sophos XGS 116, 118, 126, 128, 136 or 138 firewall in two rack spaces and connects its ports to the front through shielded cables and couplers, which protect the signal from electrical interference.\u003c\/p\u003e\n\u003cp\u003eBuilt for industrial sites and other electrically noisy rooms. Rackmount.IT builds it for dual power supply setups, with the power supply fixed inside so it can't be pulled loose. The 116W to 136W wireless models fit too, though the kit isn't shaped around their antennas. Finished in signal white.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Sophos XGS 116, XGS 116W, XGS 118, XGS 118W, XGS 126, XGS 126W, XGS 128, XGS 128W, XGS 136, XGS 136W, XGS 138\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163143209100,"sku":"RM-SR-T16I","price":184.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/8a0830d328300669e29032862a18d229b2a5a12f.jpg?v=1789569431"},{"product_id":"rackmount-it-rm-fr-w1","title":"Rackmount.IT RM-FR-W1 DIN-Rail Mount for FortiGate Rugged 60F","description":"\u003cp\u003eFor the places that have a DIN rail instead of a rack: control cabinets, machine enclosures, utility panels. The bracket holds a FortiGate Rugged 60F on standard DIN rail.\u003c\/p\u003e\n\u003cp\u003eIndustrial sites usually mount everything else on DIN rail already, so the firewall may as well match instead of sitting loose in the bottom of a cabinet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e FortiGate Rugged 60F\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163143241868,"sku":"RM-FR-W1","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/907f20fa534ae489bb1a7daff9413529059e3b86.jpg?v=1789569409"},{"product_id":"rackmount-it-rm-fr-t15","title":"Rackmount.IT RM-FR-T15 Rack Mount Kit for FortiGate 80F, 81F","description":"\u003cp\u003eMounts the FortiGate 80F or 81F in one rack space with the ports brought forward, so the rack stays tidy and the firewall stays reachable.\u003c\/p\u003e\n\u003cp\u003eThe power supply mounts inside the tray, and the vented panels keep the airflow path the firewall was designed around.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e FortiGate 80F, 81F\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163143274636,"sku":"RM-FR-T15","price":165.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/0b578a813cf324b78747440c9037b3298cc6ba92.jpg?v=1789569401"},{"product_id":"rackmount-it-rm-sw-t11","title":"Rackmount.IT RM-SW-T11 Rack Mount Kit for SonicWall TZ270, TZ370, TZ470","description":"\u003cp\u003eMounts a SonicWall TZ270, TZ370 or TZ470 in one rack space with its ports at the front, and fits the older TZ300, TZ350 and TZ400 as well. The power supply is fixed inside the kit, where it can't be pulled loose.\u003c\/p\u003e\n\u003cp\u003eFor the W wireless models, the front panel has punch-out holes for the antennas; SMA extension cables aren't included. Finished in jet black.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e SonicWall TZ270, TZ270W, TZ300, TZ350, TZ370, TZ370W, TZ400, TZ470, TZ470W\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163143307404,"sku":"RM-SW-T11","price":146.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/c7f000d8f7cee852ba709613f116b8268f5f652a.jpg?v=1789569432"},{"product_id":"rackmount-it-rm-fr-t15i","title":"Rackmount.IT RM-FR-T15I Shielded Rack Mount Kit for FortiGate 80F, 81F","description":"\u003cp\u003eThe shielded version of the RM-FR-T15. It mounts a FortiGate 80F, 80F-BYPASS or 81F in one rack space and connects the ports to front-facing keystones through shielded cables and couplers, which protect the signal from electrical interference.\u003c\/p\u003e\n\u003cp\u003eBuilt for industrial sites and other electrically noisy rooms. The power supply is fastened inside the kit so it can't be pulled loose. Finished in signal white.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e FortiGate 80F, 80F-BYPASS, 81F\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163144257676,"sku":"RM-FR-T15I","price":174.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/d8af9b38ffd182a1e6b0d5d6286fe37066d22bc1.jpg?v=1789569403"},{"product_id":"rackmount-it-rm-fr-t17","title":"Rackmount.IT RM-FR-T17 Rack Mount Kit for FortiSwitch 108F","description":"\u003cp\u003eGets the FortiSwitch 108F off the shelf and into the rack, with its ports facing forward and its power supply held inside the 1U tray.\u003c\/p\u003e\n\u003cp\u003eThe natural companion when a FortiGate is already racked in a FortiRack kit, so switch and firewall line up in the same rack spaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e FortiSwitch 108F\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163144749196,"sku":"RM-FR-T17","price":137.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/a8f15e538a1753c8a1f7caaeb63e80cc0ad42830.jpg?v=1789569404"},{"product_id":"rackmount-it-rm-wg-t7","title":"Rackmount.IT RM-WG-T7 Rack Mount Kit for WatchGuard Firebox T80, T85","description":"\u003cp\u003eThe 1U kit for the Firebox T80 and T85, PoE version included, with its ports brought to the front of the rack and the power supply secured inside.\u003c\/p\u003e\n\u003cp\u003eWatchGuard red is a giveaway that a desktop box is doing a rack's job. This puts it where it should have been from the start.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e WatchGuard Firebox T80, Firebox T85, Firebox T85-PoE\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163144781964,"sku":"RM-WG-T7","price":156.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/240a0bd6394705a62af2d56bbb23a87180cb1cc0.jpg?v=1789569435"},{"product_id":"rackmount-it-rm-ci-t11","title":"Rackmount.IT RM-CI-T11 Rack Mount Kit for Cisco ISR 1100 and ISR 1100X Series","description":"\u003cp\u003eMounts an ISR 1100 or 1100X series router in one rack space, with the ports at the front where patching happens.\u003c\/p\u003e\n\u003cp\u003eThe kit holds the power supply inside the enclosure, which matters in branch racks that get worked on by whoever is on site that day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Cisco ISR 1100 Series, ISR 1100X Series\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163144814732,"sku":"RM-CI-T11","price":137.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/ebb7b5bce0c6be4031df4b0f3a7195294fcc5538.jpg?v=1789569411"},{"product_id":"rackmount-it-rm-bc-t2","title":"Rackmount.IT RM-BC-T2 Rack Mount Kit for Barracuda F12, F18 Rev. B, F80 Rev. B","description":"\u003cp\u003eThe 1U mount for Barracuda's compact CloudGen firewalls, with the ports facing the front and the power supply secured inside.\u003c\/p\u003e\n\u003cp\u003eCheck the revision on F18 and F80 units before ordering, since the Rev. B chassis is what this kit is cut for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Barracuda CloudGen Firewall F12, F18 Rev. B, F80 Rev. B\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163144847500,"sku":"RM-BC-T2","price":146.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/9f020ef2a8b0d9a3c6cf85dd23cf76d888907f6b.jpg?v=1789569441"},{"product_id":"rackmount-it-rm-cp-t4","title":"Rackmount.IT RM-CP-T4 Rack Mount Kit for Check Point 3100, 3200, 3600, 3800","description":"\u003cp\u003eCovers four Check Point appliances with one part number, racking any of them in a single rack space with the ports brought forward.\u003c\/p\u003e\n\u003cp\u003eThe power supply is held inside the enclosure, which keeps the back of the rack free of a loose brick and a tug-prone cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Check Point 3100, 3200, 3600, 3800\u003c\/p\u003e","brand":"Rackmount.IT","offers":[{"title":"Default Title","offer_id":59163144880268,"sku":"RM-CP-T4","price":96.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7828\/5964\/files\/89f84f80d15cb84ce1cdd72e11982dbeb76994ad.jpg?v=1789569440"}],"url":"https:\/\/rackit.com\/collections\/all.oembed?page=5","provider":"Rack IT","version":"1.0","type":"link"}